8 Ways To Remove The Activate Windows 10 Watermark

What Is Windows Activation?

First, let’s define what Windows activation is.

The operating system stays inactive after you download Windows 10 for free from Microsoft and install it on any machine. Activation verifies that your version of Windows is genuine by comparing it to Microsoft’s servers. Windows 10 may be activated in one of two methods. You may either use a product key or a digital license to activate it.

When you buy a Windows 10 license from Microsoft or any other vendor for that matter, you’ll be given a product key. If you bought your PC pre-built, it probably came with a product key as well. Those who updated from a licensed copy of Windows 7 or Windows 8 to Windows 10.1, on the other hand, have a digital license and don’t require a product key to activate.

Read more:-

You may link your digital license to your Microsoft account in Windows 10, which makes reactivating it considerably easier in the future (as we’ll see).

How Does A Non-Activated Windows 10 Work?

With a few minor exceptions, a non-activated copy of Windows 10 performs nearly identically to an active one.

The Activate Windows watermark may be detected in two ways: the existence of a watermark in the bottom-right corner of your screen, and a prompt in your settings that states your Windows is not yet activated. Furthermore, all of the things in your settings’ Personalization option become worthless. You can’t change the wallpaper, theme color, Start menu, or other settings because of this.

If none of the aforementioned issues annoy you, Windows 10 will run normally. You’ll still get system updates, but there won’t be any annoying popups.

We’ll go on to the most common causes of the watermark appearing after this explanation of Activation. We’ll also go through how to get rid of the prompt.

What Causes The Activate Windows Watermark To Appear

Before eliminating the prompt, it’s critical to understand why it’s there. It aids in a better understanding of the procedure. The Watermark is used for a variety of reasons. Here are a few:

  • The most typical reason is that Windows has expired or has not yet been activated.
  • Windows License Invalid: You can use a key you receive from online platforms, but it won’t function since it’s already been used. Microsoft uses online activation technology to prevent other people from using the same product key as you.
  • If you bought a license for Windows 10 Professional Edition but installed Windows 10 Home Edition on your PC, you have an unmatched Windows version. Despite the fact that the key is 100% genuine, the watermark remains visible due to the mismatched Windows 10 version.

Windows activation also unlocks other capabilities that you won’t be able to use unless you activate your computer. You’ll get Windows updates, security features, Windows Defender, and a lot more if you activate Windows.

What Causes The Activate Windows Watermark To Appear
Remove the Windows 10 Activation Watermark TechDipper is the source of this image. So now we’ll go through how to get rid of the prompt; keep reading to learn more.

Method 1: Remove the Activate Windows Watermark using Regedit

  • Start by typing Regedit into the search box and pressing Enter.
Remove the Activate Windows Watermark using Regedit
Image Credit: TechDipper

(If UAC prompts you, select Yes)

  • Go to HKEY CURRENT USER > Control Panel > Desktop to complete the process.
    Next, scroll down to PaintDesktopVersion in the Desktop folder and double-click it to open it.
  • Finally, ensure that the Hexadecimal option is selected and that the value is set to “0.” Then, to preserve your changes, click OK.
Then, to preserve your changes, click OK.
Image Credit: TechDipper

You restart your computer after closing the registry editor. The watermark should now be gone once you log back into your desktop.

Method 2: Remove the Windows Watermark Using Windows PowerShell

Because Windows would only be enabled for 90 days, this approach is only temporary. You may, however, repeat the procedure to get another 90 days. Follow the steps below to do this:

Start by typing PowerShell, then right-clicking and selecting Run as Administrator.

Remove the Windows Watermark Using Windows PowerShell
Image Credit: TechDipper

(If UAC prompts you, select Yes)

In the PowerShell window, type and hit Enter the following command.

mgr /renew

In the PowerShell window, type and hit Enter the following command.
Image Credit: TechDipper

Method 3: Enter a Valid Product Key

Enter a Valid Product Key
Image Credit: Makeuseof

Windows 10 isn’t active yet, as seen in the graphic above, because the prior version of Windows wasn’t activated either. We updated an unauthorized copy of Windows 7 to Windows 10 in this virtual computer without ever entering a product key.

In this case, Windows 10 is still turned off, and the watermark appears. If you installed a new copy of Windows 10 on a PC but forgot to enter a product key during setup, you’ll be in the same boat.

All you have to do now is enter a legitimate product key to fix the problem. Follow the steps below to get started:

  • To begin, select the Change product key from the drop-down menu.
  • Then, to activate Windows, input your 25-digit product key.
  • Windows 10 should activate and remove the watermark if you use a genuine key that hasn’t been used too many times.

Method 4: Run the Troubleshooter for Activation.

When you make substantial modifications to your computer, such as replacing the motherboard, the activation issue may arise. Because Windows 10 connects your digital license to the components of your PC, it will no longer recognize it as your machine if you make significant modifications.

You can use the Windows activation troubleshooter to remedy this. This will allow you to re-activate Windows by establishing a link between your Microsoft account and your machine. To do so, simply follow the steps below:

  • To begin, go to the settings tab.
  • Then select Update & Security from the drop-down menu.
  • After that, go back to Activation and click Troubleshoot.
  • Then wait as the Troubleshooter boots for a time.
  • Then select “This device’s hardware was recently changed.” You’ll be asked to sign in using your Microsoft account.

This won’t work if you haven’t linked your digital license to your Microsoft account before the hardware upgrade. You may try contacting Microsoft support to resolve the issue, but there’s no assurance that you’ll get a response.

Method 5: Using Ease of Access, disable Activate Windows Watermark.

We may also use the Windows 10 Ease of Access option to remove the activated Windows watermark. Don’t be irritable; here’s how to;

First, launch the Control Panel program by going to the Start menu and searching for it.

Using Ease of Access, disable Activate Windows Watermark.
Image Credit: TechDipper

Navigate to the Ease of Access Centre after that.

Navigate to the Ease of Access Centre after that.
Image Credit: TechDipper
Select Remove Activate Windows Watermark under Ease of Access. Select Make the computer easier to view on the following screen.Select Make the computer easier to
 Image Credit: TechDipper

To check the box, scroll down to the bottom of this page. Background pictures should be removed (where available)

To check the box, scroll down to the bottom of this pageImage Credit: TechDipper

Remove the Activate Windows Watermark for easier access.

Click OK and restart your computer after that.

The Windows watermark should be gone now that it has been enabled.

Method 6: Tips for Getting Rid of the Activate Windows Watermark in Windows 10

Disabling Windows 10 tips is another approach to get rid of the active Windows watermark specifically for Windows 10. Here’s how to go about it:

  • To begin, go to Start and select Settings (The button that looks like a gear)
  • Then, under System, select Notifications & Actions.
  • Finally, scroll down and turn off the light. Show me the Windows welcome screen after you’ve installed updates and As you use Windows, get tips, techniques, and suggestions.

That’s all there is to it; you’re now free.

Method 7: Activate Windows Watermark should be removed via CMD.

When you run your Windows in test mode, the enabled Windows watermark may appear. If your test mode is running, you can disable it quickly using CMD. Here’s how to do it:

  • To start, go to Start and type in CMD, then right-click and select run as administrator.
  • (If UAC prompts you, select Yes)
  • Enter the following command in the cmd window and press enter.

credit -set TESTSIGNING OFF

If everything goes well, you should see the message “The process has completed successfully.” Restart your machine. That’s all there is to it.

Method 8: Use the Universal Watermark Disabler to remove watermarks.

  • The software must be downloaded first.
  • Then, after launching the software, select Install.
  • Because your computer will restart after installation, be sure you have made all necessary backups.
  • The watermark should have vanished when it starts up after a restart.

Leave a Comment